V2 feed edit - changing part packaging gives "Enter an integer" message

SMALLSMT Forum � Vision Placer software � Vision Placer software V2 & V1 � V2 feed edit - changing part packaging gives "Enter an integer" message

Topic settings

Print view

Jump to forum

Forum SMALLSMT Forum Hardware questions VISION PLACER Hardware questions SMT VISOR Hardware questions HR-300 Reflow Oven Found on the internet Vision Placer software Vision Placer software V2 & V1 Vision Placer V2 Bug List Tips & Tricks DotMaker Software PnPCreator Common area SMT related questions User talk Marketplace Electronics Kendryte K210 RISC-V Controller

#1 | V2 feed edit - changing part packaging gives "Enter an integer" message datum

Fri Jul 19, 2019 3:00 pm (Last edited: Fri Jul 19, 2019 3:02 pm)

Hello, we are using software V2.044.
Sometimes when trying to change the "Part Packing" field in "feed edit" on strip / grid box feeders (I've tried all the North feeders, all give the same message) I get a message "SMT - Enter an integer." but unfortunately, the eror message doesn't tell which field it wants me to change. See attached picture N14_after_2.PNG - Bild entfernt (keine Rechte) It does not matter if all number fields are filled, you get that message if you try to press "OK". As far as I can tell, all relevant fields have integer values in them.

There must be something I'm doing wrong. It would be nice to know what it is.
Workaround: for now, I simply cancle the edit and try again, until I make the change.

Torfinn

reply

#2 | RE: V2 feed edit - changing part packaging gives "Enter an integer" message datum

Fri Jul 19, 2019 8:32 pm

Ok, I figured it out. Somehow, bad / missing values for the push feeder gets imported into the feed setup (from parts database perhaps?) and even if "Feeder Mode" is set to "Grid Box" the feed edit dialog reacts to those.
Solution: temporarily change "Feeder Mode" to "integraton Feed", enter sane values in "Pushfeeder Settings" and change "Feeder Mode" back to "Grid Box" again.

Torfinn

reply