Hello.
What is the recommended lubricant for HIWIN ball screws and linear guides?
Is the lubricant with which the machine came to be used for transportation or can it be used?

I solved this with Michael 3 weeks ago.
Lubricants recommended by Hiwin:
HIWIN PLO-05
HIWIN G05
Klüber Klüberlub BE 71-501
Fuchs Lubritech Lagermeister EP2
Lubcon TURMOGREASE Li 802EP

How to lubricate properly?
Using a special tool or is it enough to lubricate the screws and guides from above?

jurp, thanks for the lubricant list.
Unfortunately, I couldn't find where to buy grease from the recommended list.
But I found SKF LGMT2. It is based on lithium soap. Can I use it?

I haven't chosen a lubrication tool yet. We don't sell Hazet 2162M. While looking for an analogue.

I requested lubricating grease from your local HIWIN representative.
Another compliant should be MOGUL LVS2.
In general, you should go to use lubricating grease:
category K1K, or K2K
viscosity / consistency NLGI2
So yes, LGMT2 can probably be used.
The lubricant must not contain graphite, or MoS2!